https://greyhive.com/videos/watch/7cdf1ffc-6342-4881-85ed-61d035ffb6a1 I know your first question is you have is “how did I make the face on the thumbnail?” and the answer is “I’m not telling you.” In this video, we discuss the most effective and safest method to clear a jammed Airgun Barrel. The key piece of equipment that you will need for this is an appropriately sized rod of some sort that can fit down the barrel of your air gun and ideally is made of a material that will not break off in the barrel, nor will it, scratch the barrel. As long as you use something along the lines of a brass rod, or a metal that is softer than steel, you should be fine in the rod should meet all the requirements to complete this task.  Unfortunately, not every situation is the most ideal and we always recommend prioritizing safety, so be sure that you degas your Airgun, and if possible, remove your barrel as well to eliminate any potential for there being a discharge from the Airgun. If you do not have a rod of some sort that will fit down the barrel, then you are pretty much SOL.  AirStryk Industries is not responsible nor liable for any harm or damage caused by following the instructions in this video. We are trained professionals, and we do not recommend the method shown in this video without following proper safety, measures first to avoid hazards. Do this at your own risk.  Tue, 10 Nov 2026 18:10:39 GMT https://validator.w3.org/feed/docs/rss2.html PeerTube - https://greyhive.com https://greyhive.com/lazy-static/avatars/5746210d-885d-44b2-9be0-92bf1e4d34df.webp https://greyhive.com/videos/watch/7cdf1ffc-6342-4881-85ed-61d035ffb6a1 All rights reserved, unless otherwise specified in the terms specified at https://greyhive.com/about and potential licenses granted by each content's rightholder.