Drop your thoughts in the comments: do you prefer ported or non-ported?

Disclaimer: This video is for informational and educational purposes only. Firearms can cause serious injury or death and should only be handled by trained, responsible individuals in a safe, lawful setting. Always follow firearm safety rules, wear appropriate eye and hearing protection, and follow manufacturer guidance. Results apply to the equipment, ammunition, and conditions shown; your results may vary. This video is not a guide to modifying firearms. Consult a qualified gunsmith about modifications.

#PortedBarrel #Ballistics #VelocityTest

I don’t carry with a round chambered. In this video, I explain why—and why I train around that choice.

My biggest concern is the possibility of an accidental discharge while playing with my daughter. When I weigh that concern against the possibility of needing to defend myself on an ordinary day, I choose to accept the additional step of chambering a round. That’s my personal assessment, and I recognize that it comes with tradeoffs.

My kids’ safety is at the center of this decision.

⚠️ SAFETY DISCLAIMER: This video shares my personal perspective, not firearms instruction or a recommendation to copy my carry setup. An empty chamber does NOT make a firearm childproof or replace safe handling, secure storage, or preventing access by children. Additional steps can create delays or fail under stress; practice does not guarantee performance in an emergency. Seek qualified instruction and follow applicable laws. When stored, firearms should be locked and unloaded, with ammunition locked separately and keys or combinations inaccessible to children. Secure firearms before physical play with kids.

Has becoming a parent changed how you think about carrying? Share your perspective below—keep it respectful.

#FirearmSafety #ResponsibleGunOwnership #ConcealedCarry

In today’s episode we test one of the oldest traditions in gun culture… stereotyping people based on what they wear and what they shoot. 😂

The fits:
• The Civilian
• The Dadbod
• The Tacticool Tool
• El Tío Fit 🌵

Some stereotypes were accurate… some definitely weren’t.

But underneath the jokes is a real conversation about firearm culture, craftsmanship, and why engraved firearms aren’t just for “rich guys” or the stereotypes people imagine online. A lot of these pieces end up in the hands of collectors, military veterans, law enforcement, hardworking dads, and people wanting to pass down something meaningful to family.

The AK-47 in this video is actually my next engraving and gold plating canvas. I ran the FRT as a function check to ensure the rifle is operating properly before beginning the engraving process.

Stay tuned because that transformation video is going to be INSANE.

⚠️ DISCLAIMER:
All firearms were handled safely in a lawful and controlled environment by lawful owners. This video is intended for entertainment, commentary, and artistic discussion purposes.

#AK47 #GunCulture #HandEngraving #FRT #Firearms #Comedy #Tactical #2A #CustomGuns #GoldPlating #Engraving #AKBuilder #GunHumor

What happens when you take a hand engraver… and give him paint, a canvas, and a few “tools of the trade”?

Well gollee… this might be the most American art experiment I’ve ever done.

Today I stepped away from traditional firearm engraving and tried something a little different—creating abstract art by shooting tempera paint bottles out here in the Idaho desert.

We ran a few different setups, tested some “creative techniques,” and let’s just say… some worked better than others 😂

👉 Dad’s ol’ shotgun?
Right darn tootin… that thing made the BEST art.

👉 The AR setups?
Let’s just say… we had a few technical difficulties.

The FRT definitely needs some tuning, so I’ll be doing a full breakdown and episode on getting that dialed in properly. Stay tuned for that.

⸻

🎯 What you’ll see in this video:

• Turning firearms into paintbrushes (literally)
• Slow motion paint explosions
• Tactical gear vs peak dad performance
• Controlled chaos… kinda
• One very messy “masterpiece”

⸻

⚠️ DISCLAIMER:
All activities shown in this video were conducted in a safe, controlled environment, in compliance with all local, state, and federal laws. Firearms were handled responsibly with proper safety precautions in place.

This video is for entertainment purposes only. Do not attempt to recreate anything you see without proper training, knowledge, and a safe/legal environment.

⸻

If you enjoyed this video and want to see more creative builds, firearm engraving, and slightly questionable art decisions…

👉 Subscribe and join the crew

And let me know in the comments…
What should I turn into art next?

⸻

#art #abstractart #firearms #slowmotion #dadlife #engraving #tactical #funnyvideo

I accidentally DESTROYED my Laowa Probe Macro Lens… 😳💥

What started as a simple solder repair on the micro usb connector quickly turned into a $1500 mistake when I dropped one of the most unique lenses ever made. In this video, I break down exactly what happened, what broke inside the lens, and whether it can actually be repaired.

If you’re into macro cinematography, filmmaking gear, or camera setups, this is something you NEED to see before using a probe lens.

👉 Was it user error… or a design flaw?
👉 Can this lens be fixed… or is it DONE?

Watch till the end — the damage might surprise you.

Laser engraving allows for extremely fine detail and consistency, making it a powerful tool for customizing firearms and creating unique designs.

Whether you’re interested in custom Glock builds, firearm engraving, metal polishing, or gunsmithing, this video shows part of the process behind turning a factory firearm into something unique.

Subscribe for more content on:
• Firearm engraving
• Custom Glock builds
• Laser engraving projects
• Gunsmithing & metal finishing

Follow for more engraving work:
TikTok: tiolalo208
Instagram: mountainriverdesignstudio

#Glock43X #LaserEngraving #CustomGlock #FirearmEngraving #GlockBuild #MetalEngraving

🔧 My Hand Engraving Setup

In this video, I’m showing the core tools and equipment I use in my engraving shop — from air systems and sharpening setups to magnification and support gear.

Featured equipment includes:
GRS Mach AT, Steve Lindsay Classic Graver, GRS Apex System, GRS Hone, diamond sharpening wheels, EMZ-13TR microscope, OptiVISOR, Vevor fume extractor, and more.

🔗 All gear shown can be found on my Linktree:
TIOLALO208

If you’re into precision metalwork and professional engraving setups, subscribe for more shop content.

In this video, I walk through the preparation stage of revamping a wood firearm stock, focusing specifically on surface evaluation, sanding, and prep work before any carving or checkering begins.

This step is critical — proper prep determines how clean your lines will be later and how well the final work holds up over time. I break down my approach to:
• Inspecting the stock before work begins
• Removing old finish and imperfections
• Progressive sanding techniques
• Establishing a clean, even surface ready for layout

This video is centered entirely on craftsmanship, woodworking fundamentals, and process. No carving or checkering is performed yet — this is all about laying the foundation correctly.

🔧 Tools and products used during the prep and sanding process are linked below for reference and educational purposes.

⚠️ Disclaimer:
This content is provided for educational and artistic purposes only. Any firearm components shown are handled in compliance with all applicable federal and state laws.

If you’re interested in traditional stock work, engraving prep, and fine woodworking, subscribe and follow along — this project continues in future episodes.

In this video, I’m giving you a full rundown on everything I’ve been working on lately.

👊 Support the Channel:
💎 Subscribe for more engraving, metal art, and fabrication content
👍 Like & comment — it really helps boost the videos
🎥 Follow my shop builds & livestreams: @TioLalo208